It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
This form of inspection is endorsed and recommended by several associations and regulatory bodies such as the InterNational Electrical Testing Association and National Fire Protection Association among several others. It has 1 to 4 returns on investment for both the labor and material used. It is this cost benefit analysis that make is a viable business for many companies that now offer this service.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
If you need information about electrical infrared inspection, pay a visit to the web pages here today. You can see details at http://www.infraredscanningservice.com now.
No comments:
Post a Comment