Nowadays, a USB has become one of the main necessities because it is actually important for one to store some of is digital data. Now with this necessity, many people would actually like to have custom made usb drives to make their drives look beautiful. Now instead of going to a store to make one, it is actually possible to create one at home.
Now the first step in doing this would be to get a thumb drive and take out the existing case. It is important to get the internals because this is what will be used to make the custom made drive. One has to be very careful though because the internal part of the drive is quite sensitive.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So basically, those are some steps on how to create a custom thumb drive. Most people would go to stores in order to make these things. However, one can actually save a lot of money and time if he would just learn the easy steps of creating these things at his very home. These steps are extremely easy to do and practically anyone can do it as long as he has some basic materials at home.
Now the first step in doing this would be to get a thumb drive and take out the existing case. It is important to get the internals because this is what will be used to make the custom made drive. One has to be very careful though because the internal part of the drive is quite sensitive.
One very important thing to take note in this step is that sometimes one would be needing a screwdriver. Although there are no screws found here, the outer covering may be hard to take off with just bare hands. So with a screwdriver, he will have an easier time snapping off the existing cover without damaging the inside of the usb.
After that, then the next thing he has to do would be to get a little creative and look for an outer covering. Now this part is undoubtedly the most fun part because it is where one will choose what he would want as a new cover. Now one can actually use anything regardless of the material.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
In this step, one would have to get a drill because he will need to open up a hole if for example, his toy does not have a hole on top. Now he will be needing a lot of measurements like the width as well as the length. Once he has already drilled the hole, then all he has to do would be to put the usb in.
The final step in this process would be to now just glue the thumb drive to the hole. Now one can do this by just putting the glue at the entrance of the hole and just wait for it to dry. One can do this by placing it in front of an electric fan or a hair dryer.
So basically, those are some steps on how to create a custom thumb drive. Most people would go to stores in order to make these things. However, one can actually save a lot of money and time if he would just learn the easy steps of creating these things at his very home. These steps are extremely easy to do and practically anyone can do it as long as he has some basic materials at home.
About the Author:
You can visit bestcustomflashdrives.com for more helpful information about Making Custom Made Usb Drives.
No comments:
Post a Comment